Insert Bearings Spherical OD

Contact Now

The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.

 

 


Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

 

 

LINK BELT UG2E48NL Insert Bearings Spherical OD

0.20 KGS 22mm
Standard Two Rubber Seals

LINK BELT UG2E20NL Insert Bearings Spherical OD

Brass 0.02 KGS
Open Type In Stock

LINK BELT UG239NL Insert Bearings Spherical OD

C3 160mm
40mm Open Type

LINK BELT UG231HL Insert Bearings Spherical OD

Brass 23028-e1a-m-c3-fag
Open Type 53mm

LINK BELT UG224E3LK33 Insert Bearings Spherical OD

120mm 32.75mm
2.559inch 0.02 KGS

LINK BELT UG222NL Insert Bearings Spherical OD

Single Metal Shield 0.87 KGS
Standard 22mm

LINK BELT UG228HL Insert Bearings Spherical OD

925 75mm
950 380mm

LINK BELT UG216HL Insert Bearings Spherical OD

0.085 7mm
17mm 45000

LINK BELT UG211NL Insert Bearings Spherical OD

42.00 mm 70.000 mm
One Seal 2.50 mm

LINK BELT U232E3L Insert Bearings Spherical OD

C3 40mm
7500 23mm

DODGE INS-SXV-107 Insert Bearings Spherical OD

200 mm 2000 kN
208 kN 3 mm

DODGE INS-SXV-108 Insert Bearings Spherical OD

465 In Stock
53mm Open Type
1/11