Angular Contact Ball Bearings

Contact Now

Angular-contact ball bearings are similar to deep-groove ball bearings except that the line of action of the load acting through the contacts between balls and raceways forms an angle with the bearing axis. The bearings are therefore particularly suitable for carrying combined (axial and radial) loads.Single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.

 

 

Angular Contact. Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.The load lines of the angular contact bearings back to back are separated from the bearing shaft.

 

 

It can withstand axial loads acting in both directions, but the load in each direction can only be absorbed by one bearing. Back-to-back mounted bearings provide a relatively rigid bearing configuration and can withstand overturning moments.

 

 

NTN 6902 Bearing

193 kN SKF
91 mm 20 mm

1.575 Inch | 40 Millimeter x 3.543 Inch | 90 Millimeter x 1.437 Inch | 36.5 Millimeter SKF 5308MZZG Angular Contact Ball Bearings

1.575 Inch | 40 Millimeter x 3.543 Inch | 90 Millimeter x 1.437 Inch | 36.5 Millimeter 3600 1/min / Limitin
75,2 mm 29 mm

2.953 Inch | 75 Millimeter x 7.48 Inch | 190 Millimeter x 1.772 Inch | 45 Millimeter SKF 7415PJDU Angular Contact Ball Bearings

2.953 Inch | 75 Millimeter x 7.48 Inch | 190 Millimeter x 1.772 Inch | 45 Millimeter 23 mm
23 mm 90

2.953 Inch | 75 Millimeter x 7.48 Inch | 190 Millimeter x 1.772 Inch | 45 Millimeter SKF 7415PJ Angular Contact Ball Bearings

2.5 mm 71.50 mm
10 -40 to 120 ºC
1/12