MCGILL CFH 1 5/8 S Cam Follower and Track Roller - Stud Type

Basic static load rating C0:216 kN; Calculation factor Y:0.68; r1,2 min.:3 mm; Fatigue load limit Pu:25.5 kN; da max.:77 mm; d:65 mm; Da max.:118.5 mm; r3,4 min.:3 mm; C:26 mm; Mass bearing:2.19 kg;

Accessories:Two Shields; d:100.000 mm; D:215.0000 mm; Oil Speed Rating Open/Shielded n2:3600 rpm; Sealed Speed Rating n3:2100 rpm; Basic Dynamic Radial Load Rating C:174000 N; Fillet Radius ra:2.50 mm; Grease Speed Rating Open/Shielded n1:3000 rpm; Oil Speed Rating n2:3600 rpm; B:47.00 mm;

Accessories:Two Shields; d:70.000 mm; Grease Speed Rating n1:2800 rpm; Oil Speed Rating n2:3800 rpm; Basic Static Radial Load Rating Co:186000 N; B:66.70 mm; Sealed Speed Rating n3:2800 rpm; D:150.0000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:172000 N;

dn:33.4 mm; K:0.5 mm; Preload class A GA:35 N; Static axial stiffness, preload class D:71 N/µm; Static axial stiffness, preload class C:51 N/µm; a:10.9 mm; d:25 mm; Static axial stiffness, preload class A:28 N/µm; Calculation factor f2C:1.05; r1,2 min.:0.6 mm;

Mass bearing:0.18 kg; Basic dynamic load rating C:14.3 kN; d1 ≈:26.15 mm; D1 ≈:37.2 mm; D:47 mm; d:17 mm; Fatigue load limit Pu:0.19 kN; B:19 mm; Calculation factor Y0:1.3; ra max.:1 mm;

B4:35.712 mm; Sleeve:S 144x7.1/2; d3 max.:279.527 mm; d:220 mm; Mass adapter sleeve assembly:21 kg; Lock nut:N 44; Lock washer:W 44; B1:183.566 mm; Hydraulic nut:HMVC 44E; Threads per inch:8;

D:160.0000 mm; Basic Dynamic Radial Load Rating C:114000 N; d:75.000 mm; Accessories:One Seal; Basic Static Radial Load Rating Co:76500 N; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:5000 rpm; Grease Speed Rating n1:4300 rpm; B:37.00 mm; Sealed Speed Rating n3:2800 rpm;

Basic static load rating C0:17.6 kN; U:16 mm; Fatigue load limit Pu:2.12 kN; Fw:16 mm; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 16x22x3; Mass needle roller and cage assembly:0.012 kg; Basic dynamic load rating C:14.2 kN; Designation associated G design

Permissible sliding velocity v max.:1 m/s; B:9.8 mm; Coefficient of friction µ min.:0.08; Coefficient of friction µ max.:0.15; D:37 mm; Mass bushing:0.02 kg; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:f7 m/s; Specific static load factor K0:120 N/mm²; d:32 mm;

Ca:196 mm; H2:115 mm; P55°:7000 kN; P90°:3400 kN; ba max.:181 mm; L:880 mm; A:363 mm; Pa:1800 kN; Cap bolt, size:M 30x220; P0°:5400 kN;

Basic Dynamic Radial Load Rating C:172000 N; B:66.70 mm; Oil Speed Rating n2:3800 rpm; Grease Speed Rating n1:2800 rpm; Basic Static Radial Load Rating Co:186000 N; Sealed Speed Rating n3:2800 rpm; Fillet Radius ra:2.00 mm; d:70.000 mm; D:150.0000 mm; Accessories:Two Seals;

Sealed Speed Rating n3:4300 rpm; Fillet Radius ra:2.00 mm; B:44.45 mm; Basic Static Radial Load Rating Co:38000 N; Basic Dynamic Radial Load Rating C:61800 N; D:110.0000 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; d:50.000 mm; Accessories:Removable Metal Shie; Grease Speed Rating Open/Shielded n

Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:180000 N; d:105.000 mm; D:190.0000 mm; Accessories:One Seal; B:65.10 mm; Sealed Speed Rating n3:1800 rpm; Grease Speed Rating n1:1800 rpm; Oil Speed Rating n2:2800 rpm; Basic Dynamic Radial Load Rating C:186000 N;

D:140 mm; d1 ≈:106.1 mm; Calculation factor Y2:2.3; Calculation factor Y0:1.6; T:78 mm; ra max.:2.5 mm; Calculation factor e:0.43; K:3 mm; Cb min.:7 mm; Basic dynamic load rating C:391 kN;

B:12.5 mm; d:10 mm; F:13 mm; Mass inner ring:0.0052 kg; r, r1,2 min.:0.3 mm;