TIMKEN MSE315BX Insert Bearings Cylindrical OD

C:43.55 kN; Z:27.5 mm; S:11.8 mm; Recommended tightening torque for set screw:22 Nm; Weight:2.97 kg; A:60 mm; T min.:-20 °C; L:150 mm; E:20 mm; C0:29.2 kN;

Housing Material:1045 Carbon Steel; Bearing Retained:No; Seals:DD (Contact Rubber S; Bearing Retained:No; Width T(mm):45 ～ 80; Holder Surface Treatment:Black Oxide Coating; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Bearing I.D. d(mm):20; RoHS:6;

S:31 mm; G:M6x1; H2:165 mm; Weight:9.79 kg; L1:95 mm; B:61.9 mm; d1:89 mm; T max.:100 °C; Designation of housing:P312-; L:330 mm;

S:12.7 mm; Designation of housing:F204N-; T max.:100 °C; A:25.5 mm; Z:22.3 mm; L:86 mm; e:15 mm; C0:6.65 kN; T min.:-20 °C; N:12mm;

T min.:-20 °C; L:115 mm; Designation of bearing:US210-31G2T20; s1:21.75 mm; B:43.5 mm; Z:34 mm; J:157 mm; e:22 mm; A1:16 mm; A:40 mm;

Shape:Flange Type; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; RoHS:6; Volume Discount:Available; Bearing Part Number:6007; Flange O.D. H(φ):104; Bearing Retained:Yes (with retaining;

Mass:4.31 kg; e:0.22; d:80 mm; Brand:NTN; Y0:3.1; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-20 °C; Nlim (grease):3,600 rpm; rs min:2.1 mm; da min:91 mm;

Days to Ship:8 Days; Material:304 Stainless Steel; O.D. H(φ):9; L(mm):20 ～ 30; Pin Dia. D(φ):6; RoHS:6; S(mm):10 ～ 20;

Roller Guiding Method:Retainer Type; Roller Lining:With Resin; B:11; Shaft:Provided; Unit:Metric Series; Days to Ship:6 Days; Volume Discount:Available; Allowable Load(N):112; D:16; Material:[Carbon Steel] 52100;

Bearing I.D. d(mm):30; Housing Material:1045 Carbon Steel; Number of Bearings:Double; Type:Bearings with Housin; Flange O.D. H(φ):104; Shape:Flanged Pilot Type; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; RoHS:6; Seals:VV (Non-Contact Rubb;

T max.:100 °C; Weight:1.31 kg; L3:57 mm; L1:70 mm; C0:11.2 kN; H2:56 mm; SW:4 mm; d1:44.1 mm; P:150 mm; L2:10 mm;

T max.:100 °C; Weight:0.47 kg; s1:15.5 mm; C0:6.65 kN; e:19 mm; J:90 mm; H:112 mm; Designation of housing:FLE204N-; d:19.05 mm; A:30.3 mm;

Recommended tightening torque for set screw:5.5 Nm; J:90 mm; H:113 mm; Designation of housing:FL204N-; N:12mm; Weight:0.5 kg; e:15 mm; A1:11 mm; A:25.5 mm; G:M6x1;

Holder Surface Treatment:Electroless Nickel P; Bearing Retained:No; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; RoHS:6; Bearing Material:[Steel] Steel; Width T(mm):35 ～ 50; Type:Bearings with Housin; Shape:Flanged Pilot Type;

Load Direction:Radial; Rolling Element Material:Steel; Bearing Style:Open Type; Bearing Style:Open Type; Load Direction:Radial; Size Standards:Metric System; Rolling Element Material:Steel; B:10; Outer Ring Shape:Flat; Size Standards:Metric System;